Product Description

Now we would like to introduce our LED lamp as below. 1. Our LED street lamp applied middle power SMD LED instead of high Power LED because of heat-sink issue and light efficiency. Compared with our competitors’ LED street lamp applying Power LED, our LED lamp applies middle power LED which is more efficient than power LED on brightness and heat sink issue. For example, the brightness of middle power LED is about *9lm/0.2W that means about *5ml/W and heat sink can be easier due to split emitting diode. With *5ml/W, our LED lamp can be more than *0% of power due to amazing heat sink structure. 2. Luminous Flux of Electric power consumption - IE**0 (**0W) : Luminous Flux - *0, **0lm, Lamp efficiency - *7.3% - IE**0 (*0W) : Luminous Flux - 4, **0lm, Lamp efficiency - *8.0% 3. Heat sink issue As you know, the LED lamp’s main issue is how to make heat-sink from each LED. We are proud of introducing our product which solved this heat sink problem perfectly. Our product’s main technologies are “Special PCB design for heat-sink” and “Tunnel structure for automatic air convection” With these main technologies, The temperature of Lighting Fixture is only Ambient temp + *5 degree celsius (Maximum) Please compare this heat sink technologies with your current LED lamp. You can verify which one you should carry in your market without any customer’s complain. 4. Brief specifications [1] High Set Efficiency : more than *0 lm / W [2] A state-of-the-art Radiant Heat Structure ? Automatic air convection to radiate heat by tunnel structure ? The temperature of Lighting Fixture : Ambient + *5℃ [3] Light Weight : 9.5 kg ( Illuminance equivalent to MH **0W ) [4] Power Efficiency : over *5% at a free voltage, Power Factor : 0.*6 [5] IP*6 Waterproof grade For more information, please visit our web-site *****